Know the new technology for investment casting

Metal fabrications are a process to achieve the desired shape and size of the components needed for various needs. Depending on convenience, cost, should be, weight, size and form of the desired component in the use of different fabrication techniques. For example, Investment Casting, laser cutting, die Casting, and other names as well as fabrication techniques.


 

We are the oldest technology for Investment Castings, which is widely used these days as well. This equipment is made ​​of Die master master pattern, which in turn produce the desired structure for collecting the desired component. It is an investment in an investment casting ceramic mold is produced by the three-step, coating stuccoing and hardening. 

This technique is used to manipulate small-sized components and is limited to 300 kg of steel and aluminum components, only the main components of this technology substitutes. It is a little more expensive equipment, but the components can be integrated to produce precise and excellent finish.

 

Laser cutting is a computer controlled, as well as gas-fueled equipment, which is used to cut and bent components. Mostly this is to cut metal with ease, and he finished with a very short time span. The initial set up is expensive, but the cost of production is cheaper, there are four different types of laser cutting equipment, such as carbon dioxide, neodymium, and neodymium yttrium-aluminum to laser micro-grantee which are used in the process, including boring, cutting, engraving and krknutean need trimming, etc. 

Casting is a technique used to produce the desired die formed, as well as a component of a master mold pouring melted materials under high pressure, mainly aluminum, zinc, copper, lead, tin and magnesium are used to throw the die Casting, however, steel and other metals can also be inaccurate. The initial set up is very expensive, but in this case, production costs are much less dependent on the mass production of low production, it is very expensive.

 

As for the tube bending die Castings would be the best option for mass production. A tube is a very simple form, without the use of the Investment Casting is here. Laser cutting is used, cut the pipe so as not to use here. Tube bending is only here to die Casting is the best technique, because it is very simple and very low production costs compared to the investment casting and laser cutting.

You may like to visit:  Metal Fabricators | Sheet Metal Fabrications